Maintenance workers who are responsible for mold maintenance work must be careful and careful to operate, and to ensure that the mold is in the best condition, which is effective in production and economy, and reduces the manufacturing cost as much as possible. So how to improve the mold to do the maintenance work! Here and Xiaobian together to learn it!
First, maintenance instructions: Plastic Injection Mold maintenance, you need to check the parts in accordance with the drawings. Even if there is no special instructions, but also in the storage when the inspection; not allowed to modify the drawings do not meet the provisions of the mold parts size, can not be used to add pad or gasket, etc.; production orders after the completion of the mold maintenance , Must refer to the production department to provide the problem, the production department records and the final product; in the mold maintenance, such as the discovery of major problems, should immediately report to the higher authorities, and wait for instructions.
Second, the specific requirements of the Plastic Injection Mold maintenance: the replacement of mold parts, to confirm the quality of the parts will be qualified; parts of the demolition, assembly to tapping, slow pressure; mold inserts assembly, with the clearance to confirm qualified; No parts such as curling, scratches, pits, dross, defects, rust, etc.; if parts replacement, timely and mold design department to communicate and confirm, remove the mold before and after, pay attention to keep the various components pull pull balance; Parts must be replaced in time.
Finally, the daily maintenance of the Plastic Injection Mold must be carried out carefully and carefully to ensure that the mold is kept at its best.